Zhangjiagang Free Trade Zone Kenshine International Co.,Ltd

DESCRIPTION:

FSB fluorine plastic alloy pump is designed and made according to international standards. The pump body is made of the metal and FEP (F46) organic combination, pump cover, impeller, and shaft sleeve are pressed by molding of fluorine plastic with metal insert. The shaft seal is mounted outside as the bellows mechanical seal. The static ring chooses 99% alumina ceramic or silicon nitride, a ring with four fluorine filling materials has good corrosion resistance. FSB fluorine plastic alloy chemical transfer centrifugal pump is suitable for conveying the sulfuric acid, hydrochloric acid, acetic acid, hydrofluoric acid, nitric acid, and aqua regia, strong alkali, strong oxidizing agents, organic solvents, antioxidant, and other harsh conditions of strong corrosive medium with any concentration. Fluorine plastic is currently one of the world's most strong corrosion-resistant materials. Prevent running, rising, dropping, leakage. FSB fluorine plastic alloy pump is widely used in the chemical industry, acid, alkali, smelting, rare earth, pesticide, dye, medicine, paper, electroplating, electrolysis, pickling, electronic components, scientific research institutions, and other industries. Fluorine plastic alloy centrifugal pump 50 the FSB - 30 D/L 50: inlet diameter (mm) FS : fluorine plastic material B: single-stage single-suction cantilever centrifugal pump 30:head (m) D : close coupling L: Shaft coupling Fluorine plastic alloy centrifugal pump features: FSB type fluorine plastic alloy pump consists of the pump body, impeller, cover, seal, bracket, pump shaft, coupling shaft, lifting bolt, nut, bottom plate, etc. 1. pump body: left and right sides of the connection department embedded steel flange ring each one molded plastic alloy. It has the advantages of compact and reasonable structure, strong corrosion-resistance, tight and reliable sealing function, stable work, low noise, high mechanical strength, no aging, no toxin decomposition, easy maintenance, smooth runner, high efficiency, energy-saving, and so on. 2. A stainless steel (1Cr18Ni9Ti) alloy is embedded in the right side of the gland. 3. Impeller: adopt the connection method of connecting shaft. The metal shaft is made of high-quality steel round processing and is formed by fluoroplastic pressing at high temperatures. 4. Mechanical seal: WB2 type, ST type adjustable single-end mechanical seal without cooling water is adopted, which is made of silicon carbide, high-purity alumina ceramics, filled tetrafluoride, graphite, and other materials.

COMMERCIAL DETAILS:

MORE DETAILS: